Building The Kinetics Harrier GR.1/GR.3 : 1/48 Scale : Intermediate Step By Step Video Build Page Two

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.17

Episode.17 we start our second camo colour H-330 Mr Hobby Dark green BS641, And go over some spraying basics of how to spray camo down and to avoid bleed though to our Dark seagrey and how to have everything nicely feathered in, we move on from this to bleaching which we use a yellow colour instead of white to get a more warmer lighter colour than our Dark green instead of a paler version if we used white.

Special Tools: Tamiya : Spray-Work Airbrush Cleaning Brush : Extra-Fine

Consumables: Mr Hobby : H-330 Dark Green BS 381C/641 GB Aircraft : Aqueous Hobby Color : Acrylic

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.18

We now in this episode get the Harriers exhausts all done with a natural metal finish, we use 3 different colours to achieve this, starting with MC-213 Stainless as a base with a bit of pre-shading of MC-219 Brass, and finally MC-214 Dark iron misted on top, all this is then buffet to give us a nice burned natural metal finish look.

Special Tools: Airbrush

Consumables: Stainless : Mr.Metal Color : Buffable Lacquer

Mr Hobby : MC-219 Brass : Mr.Metal Color : Buffable Lacquer

Mr Hobby : MC-214 Dark Iron : Mr.Metal Color : Buffable Lacquer

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.19

The Harrier takes on a new look with all the decals placed down, we go over all you need to know about decaling, using products like Micro Sol and Set, we even tackle a tricky roundel decal around the air intakes, this will need some extra care.

Special Tools: Tamiya : Decal Tweezers

Consumables: Microscale : Micro Set : Decal Solutions

Microscale : Micro Sol : Decal Solutions

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.20

The harrier now gets some weathering added by starting of with chipping, In this episode we look at the different colours for chipping we can use, from going down to bare metal to light subtle chips using multiple shades of our original camo pattern, we show you how to paint wheels with out needing a steady hand using Mr.hobby H.77 Tire Black.

Special Tools: Shesto : Reverse Action Tweezers Curved Tip/Fibre Grip : 160mm

Consumables: Mr Hobby : H-77 Tire Black : Aqueous Hobby Color : Acrylic

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.21

The weathering stage begins, starting with a sludge was to fill in all the recessed detail on the surface of the model to bring out all the detail, we can now start adding our bits and pieces, which I start by showing you the perfect way to glue our tail section together.

Special Tools: Eduard : Super Glue Applicator Tool Kapatko: ( 10 Pcs )

Consumables: Mr Hobby : Mr Cement S : 40ml

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.22

In this episode we do, painting highlights on landing gear, streaking effects with Mr.weathering liner and oil fading of the paint work.

Special Tools: Tamiya : Modeling Brush HF Standard Set

Consumables: Mr Hobby : Mr Weathering Liner Mud Colour Set

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.23

In this episode we do, Fading with oils, final post-shading, single panel wear weathering and exhaust fumes.

Special Tools: INFINITY GIRALDEZ

Consumables: Tamiya : Weathering Master : Set C : Orange Rust, Gun Metal And Silver

Video not available - You need to be subscribed to view these videos

Harrier GR.1/GR.3 By Kinetics : 1/48 Scale : Intermediate Step By Step Video Build : Episode.24

This is the final episode, We finish of with final matt coat, making glass out of glue, navigation lights, final conclusion and fianl revel photos.

Special Tools: Evolution Airbrush

Consumables: Mr Hobby : GX-113 GX Super Clear III UV Cut Flat : Mr.Color : 18ml

Video not available - You need to be subscribed to view these videos